Troubleshoot Wifi Settings on a Windows Computer

1. Basic Checks

  • Ensure Airplane Mode is off.
  • Confirm the Wi-Fi adapter is enabled in Network Settings.
  • Use the Function key (Fn + Wi-Fi icon) on laptops to toggle Wi-Fi.

2. Run Windows Troubleshooter

  • Go to Settings > System > Troubleshoot > Other Troubleshooters.
  • Run the Network and Internet troubleshooter.
  • Follow on-screen instructions to auto-diagnose and fix issues.

3. Forget and Reconnect to Network

  • Open Wi-Fi Settings.
  • Select your network and click Forget.
  • Reconnect by entering the correct password.

4. Restart Network Hardware

  • Power off your modem and router.
  • Wait 30 seconds, then power them back on.
  • Reconnect your device after a few minutes.

5. Update or Roll Back Wi-Fi Drivers

  • Open Device Manager.
  • Expand Network Adapters.
  • Right-click your Wi-Fi adapter and choose:
    • Update driver
    • Or Roll back driver if issues started after an update.

6. Reset Network Settings

  • Go to Settings > Network & Internet > Advanced Network Settings > Network Reset.
  • Click Reset Now and restart your computer.

7. Flush DNS and Reset TCP/IP

Open Command Prompt as Administrator and run:

8. Check for Interference

  • Keep your router away from microwaves, cordless phones, and Bluetooth devices.
  • Consider using mesh routers to eliminate dead zones.

9. Disable Power Management for Adapter

  • In Device Manager, right-click your Wi-Fi adapter.
  • Go to Properties > Power Management.
  • Uncheck “Allow the computer to turn off this device to save power.”

10. Check Antivirus or Firewall

  • Temporarily disable third-party antivirus or firewall software.
  • If Wi-Fi works, adjust settings or switch to a different security solution.
Was this helpful?
0 reviews